LEMON Manuals: Even more car manuals for everyone

Removal And Installation

WARNING: This page is about a different car, the 2024 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the CVVT oil control valve connector.
  3. Remove the valves (A) by loosening the mounting bolt.

    CVVT oil control valve mounting bolt: 

    9.8 - 11.8 Nm (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    [Bank 1/Intake] 

    G14560894Courtesy of KIA MOTORS AMERICA, INC.

    [Bank 1/Exhaust] 

    G14560895Courtesy of KIA MOTORS AMERICA, INC.
  4. Install in the reverse order of removal.
NOTE:
  • Install the Oil Control Valve (OCV) with the specified torques.
  • If the OCV is dropped, it may cause internal damage. (Do not reuse)
  • Apply engine oil to the valve O-ring.