LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Removal

WARNING: This page is about a different car, the 2019 Kia Stinger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the boost pressure sensor connector (A).
  3. Remove the mounting bolt (B), and then remove the sensor from the intercooler outlet pipe.

    Boost pressure sensor mounting bolt  :

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G12803473Courtesy of KIA MOTORS AMERICA, INC.