LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2019 Kia Stinger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the steering column and shaft.

    (Refer to " STEERING COLUMN AND SHAFT  ") 

  3. Disconnect the connector (A) and then remove the mode control actuator (B) after loosening the screws.
    G12799200Courtesy of KIA MOTORS AMERICA, INC.
  4. Install in the reverse order of removal.