LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Installation

WARNING: This page is about a different car, the 2019 Kia Stinger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal, and wait for at least three minutes before beginning to work.
  2. Install in the reverse order of removal.
  3. Reconnect the negative battery cable.
  4. After installing the knee airbag (KAB), confirm proper system operation.
    • Switch "ON" the ignition. The SRS indicator light should turn on for about six seconds and then off.