LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2019 Kia Stinger. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Put on gloves to protect your hands.
NOTE:
  • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
  • Take care not to bend or scratch the trim and panels.
  1. Remove the console assembly.

    (Refer to " FLOOR CONSOLE ASSEMBLY  ") 

  2. Remove the rear console bracket (A) after loosening the console lower side mounting screws.
    G12796036Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the console storage box & armrest (A) after loosening the mounting screws.
    G12796037Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the console armrest (A) after loosening the mounting screws.
    G12796038Courtesy of KIA MOTORS AMERICA, INC.
  5. Install in the reverse order of removal.

    Information 

    • Make sure the connector are connected in properly.
    • Replace any damaged clips.