LEMON Manuals
: Even more car manuals for everyone
Home
›
Kia
›
2020
›
Stinger GT2, AWD
›
Repair and Diagnosis
›
Engine Performance
›
Engine Control Systems
›
Idle Stop & Go ISG System - 3.3L
›
DC/DC Converter
›
Repair Procedures
›
Removal
›
400W
Repair Procedures: Removal: 400W
Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
Disconnect the DC/DC converter connector (A).
Courtesy of KIA MOTORS AMERICA, INC.
Remove the DC/DC converter (A) after loosening the mounting nuts.
Courtesy of KIA MOTORS AMERICA, INC.