LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Replacement

NOTE:
  • When installing the belt, make sure not to damage the pretensioner.
  1. Remove the center pillar upper trim.

    (Refer to "CENTER PILLAR TRIM ")

  2. After loosening the mounting bolt, remove the front seat belt upper anchor (A).

    Tightening torque: 

    39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

    G12820303Courtesy of KIA MOTORS AMERICA, INC.
  3. After disconnecting the pretensioner connector lock pin, remove the front seat belt pretensioner connector (A), loosen the mounting bolt, and then remove the front seat belt pretensioner (B).

    Tightening torque: 

    39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

    G12820304Courtesy of KIA MOTORS AMERICA, INC.
  4. Install in the reverse order of removal.

Information