LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air cleaner.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the engine coolant temperature sensor connector (A).
    G12848545Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the spring clip (A), and then pull the sensor from the water temperature control assembly.
    CAUTION: Note that engine coolant may flow out of the water temperature control assembly when removing the sensor.
    G12848546Courtesy of KIA MOTORS AMERICA, INC.