LEMON Manuals: Even more car manuals for everyone

Removal and Installation

  1. Disconnect the negative battery terminal.
  2. Remove the engine room under cover.

    (Refer to Engine and Transaxle Assembly - "ENGINE ROOM UNDER COVER ")

  3. Drain the coolant.

    (Refer to Cooling System - "COOLANT ")

  4. Disconnect the heater hose (A).
    G12826386Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the EGR cooler coolant hose (A).
    G12826387Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the EGR cooler pipe B (A).

    Tightening torque: 

    18.6 - 23.5 N.m (1.9 - 2.4 kgf.m, 13.7 - 17.4 lb.ft)

    G12826388Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the EGR cooler pipe A (A).

    Tightening torque: 

    18.6 - 23.5 N.m (1.9 - 2.4 kgf.m, 13.7 - 17.4 lb.ft)

    G12826389Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the EGR cooler (A).

    Tightening torque: 

    39.2 - 49.0 N.m (4.0 - 5.0 kgf.m, 28.9 - 36.2 lb.ft)

    G12826390Courtesy of KIA MOTORS AMERICA, INC.
  9. Install in the reverse order of removal.