LEMON Manuals: Even more car manuals for everyone

Check Resistance Of Oil Pressure Control Valve

  1. Ignition "OFF".
  2. Disconnect the Oil Pressure Solenoid Valve connector.
  3. Measure voltage between Pin No. 1 (Fuse-SENSOR2) and Pin No. 2 (Control) terminal of Oil Pressure Solenoid Valve. (Component Side)

    Specification:  22.0 to 26.0Ω (20°C (68°F))

  4. Is the measured value within specification?

    YES 

    NO 

    • Carefully re-do this troubleshooting guide steps.
    • If no problems were found with the circuits or connectors, replace the Oil Pressure Solenoid Valve and go to "Verification Of REPAIR " procedure.