LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Ballast

WARNING: This page is about a different car, the 2015 Kia Forte5, 2015 Kia Forte Koup, and 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the head lamp switch off.
  2. Remove the head lamp assembly.
  3. Disconnect the power connector from the lamp.
  4. Remove the ballast (A) after loosening the screws (4EA).
    Fig 1: Ballast
    G09744911Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: Be careful not to be damaged when disconnecting the ballast connector.
  5. Installation is the reverse of removal.
    NOTE:
    • Turn the head lamp switch off to avoid high voltage.
    CAUTION:
    • HID lamp shall not be used on other cars. (Fire may occur.)
    • Fire may occur when HID lamp initially lights due to the fact that arc-discharge generates high voltage (max. 20, 000V) and high current (12-13A), and are different from the halogen lamp specification.
    • Install the dust cover after confirming the locking state between bulb and bulb holder.
    • When testing the HID head lamp, turn the power on or off with switch between power supply and lamp because of high voltage.
    • Do not operate the head lamp switch with the bulb not installed, because it generates spark momently.