Repair Procedures: Removal
WARNING: This page is about a different car, the 2015 Kia Forte5 and 2015 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.
[Bank 1/Sensor 1]
- Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
- Disconnect the connector (A), and then remove the heated oxygen sensor (B).NOTE: Note that the SST 09392-1Y100 is useful when removing the heated oxygen sensor.
[Bank 1/Sensor 2]
- Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
- Disconnect the connector (A) and remove the heated oxygen sensor (B).