LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the rear seat.

    (Refer to "REAR SEAT ASSEMBLY ")

  3. Remove the fuel pump service cover (A) in the trunk.
    Fig 1: Identifying Fuel Pump Service Cover
    G09764349Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the fuel tank pressure sensor connector (A), and then remove the fuel tank pressure sensor.
    Fig 2: Identifying Fuel Tank Pressure Sensor Connector
    G09764350Courtesy of KIA MOTORS AMERICA, INC.