LEMON Manuals: Even more car manuals for everyone

Starter Solenoid Test

  1. Disconnect the field coil wire from the M-terminal of solenoid switch.
  2. Connect the battery as shown. If the starter pinion pops out (engages), it is working properly. To avoid damaging the starter, do not leave the battery connected for more than 10 seconds.
    Fig 1: Checking Starter Solenoid
    G08327837Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the battery from the M terminal.

    If the pinion does not retract, the hold-in coil is working properly. To avoid damaging the starter, do not leave the battery connected for more than 10 seconds.

    Fig 2: Checking Starter Solenoid (Battery Disconnected From M Terminal)
    G08327838Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the battery also from the body. If the pinion retracts immediately, it is working properly. To avoid damaging the starter, do not leave the battery connected for more than 10 seconds.
    Fig 3: Checking Starter Solenoid (battery Disconnected From Body)
    G08327839Courtesy of KIA MOTORS AMERICA, INC.