LEMON Manuals: Even more car manuals for everyone

Monitor GDS Data

  1. IG KEY "ON" & Engine "OFF".
  2. Erase DTC after connecting GDS.
  3. Check Smart key status if DTC is retrieved.
    Fig 1: Display - Engine Start Stop Button
    G08325375Courtesy of KIA MOTORS AMERICA, INC.
  4. Is the Smart key ECM/PCM learnt status?

    YES 

    Fault is intermittent caused by poor contact in Smart key ECM/PCM and/or ECM/PCM's connector or was repaired and Smart key ECM/PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    Go to "COMPONENT INSPECTION " procedure.