LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Removal

WARNING: In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don't do any repair work right after engine stops.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Release the residual pressure in fuel line. Refer to RELEASE RESIDUAL PRESSURE IN FUEL LINE .
    CAUTION: When removing the fuel pump relay, a Diagnostic Trouble Code (DTC) may occur.
    Delete the code with the GDS after completion of "Release Residual Pressure in Fuel Line" work.
  3. Remove the air cleaner and the air intake hose. Refer to INTAKE AND EXHAUST SYSTEM .
  4. Disconnect the fuel pressure regulator valve connector (A).
  5. Remove the ignition coil (B).
    Fig 1: Fuel Pressure Regulator Valve Connector & Ignition Coil
    G07385842Courtesy of KIA MOTORS AMERICA, INC.
  6. Disconnect the fuel feed tube quick-connector (A).
  7. Remove the high pressure fuel pipe.
    1. Remove the installation nut (B) from the high pressure fuel pump with the special service tool (SST No.: 09314- 3Q100)
      Fig 2: Identifying Special Service Tool (SST No.: 09314- 3Q100)
      G07385843Courtesy of KIA MOTORS AMERICA, INC.
    2. Remove the installation nut (C) from the delivery pipe with the special service tool (SST No.: 09314-3Q100)
    3. Remove the purge control solenoid valve. Refer to PURGE CONTROL SOLENOID VALVE .
    4. Remove the function block (D), and then remove the high pressure fuel pipe.
  8. Remove the installation bolts (E), and then remove the high pressure fuel pump from the cylinder head assembly.
    CAUTION: Unscrew the two bolts in small step (0.5 turns). If fully unscrewing one of the two bolts with the other bolt installed, the housing surface of the cylinder head may be broken because of tension of the pump spring.
    Fig 3: High Pressure Fuel Pipe, Function Block, Installation Bolts & Nuts
    G07385844Courtesy of KIA MOTORS AMERICA, INC.
    Fig 4: Delivery Pipe Installation Nut
    G07385845Courtesy of KIA MOTORS AMERICA, INC.
    Fig 5: Function Block
    G07385846Courtesy of KIA MOTORS AMERICA, INC.