LEMON Manuals: Even more car manuals for everyone

Function And Operation Principle

WARNING: This page is about a different variant/trim than selected.

Knocking is a phenomenon characterized by undesirable engine detonation or pinging that can cause engine damage. Knock Sensor (KS) senses engine and cylinder block knocking. When knocking occurs, the vibration from the cylinder block is applied as pressure to the piezoelectric element. The sensor transfers the voltage signal higher than the specified value to the PCM and the PCM retards the ignition timing. If the knocking disappears after retarding the ignition timing, the PCM will advance the ignition timing. This sequential control can improve engine power, torque and fuel economy.

Fig 1: Identifying Knock Sensor
G06361946Courtesy of KIA MOTORS AMERICA, INC.
Fig 2: Identifying Spring Washer, Load Washer, Insulator And Sleeve
G06361947Courtesy of KIA MOTORS AMERICA, INC.