LEMON Manuals: Even more car manuals for everyone

Signal Circuit Inspection

  1. Check short to ground
    1. Key "OFF".
    2. Disconnect A/C pressure sensor and ECM/PCM connector.
    3. Measure the resistance between terminal 2 of A/C pressure sensor harness connector and chassis ground.

      Specification: Infinite

    4. Is the measured resistance within specification ?

      YES 

      • Go to  2 "Check open in harness" procedure.

      NO 

  2. Check open in harness
    1. Key "OFF".
    2. Disconnect A/C pressure sensor and ECM/PCM connector.
    3. Measure the resistance between terminal 2 of A/C pressure sensor harness connector and terminal 79/C01-1 of ECM/PCM harness connector. [A/T]

      Measure the resistance between terminal 2 of A/C pressure sensor harness connector and terminal 40/C01 of ECM/PCM harness connector. [M/T]

      Specification: Approx. below 1Ω

    4. Is the measured resistance within specification ?

      YES 

      NO