LEMON Manuals: Even more car manuals for everyone

Terminal And Connector Inspection

Refer to DTC P0121 .

TPS CIRCUIT INSPECTION 

  1. Ignition "OFF"
  2. Disconnect TPS connector.
  3. Ignition "ON"
  4. Measure voltage between terminal "1", "2" and "3" of sensor harness connector and chassis ground

    Specification:

    Terminal 1: Approx. 5V

    Terminal 2: Approx. 5V

    Terminal 3: Approx. 0V

  5. Is the measured voltage within specifications?

    YES 

    NO