LEMON Manuals: Even more car manuals for everyone

Dual Battery Switch Module (DBSM)

REMOVAL 

  1. Remove the right splash shield

    Refer to SHIELD, REMOVAL AND INSTALLATION .

    GC0201657Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the electrical connector (1).
  3. Remove the bolts (2) that secure the Dual Battery Switch Module (DBsM) to the Power Distribution Center (PDC).
    GC0201663Courtesy of CHRYSLER GROUP, LLC
  4. Slide the Module out of the PDC.

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle.

During installation, torque the following fasteners to specification:

Dual Battery Switch Module (DBSM) to Power Distribution Center (PDC) 9 N. m (80 In. Lbs.)  -