LEMON Manuals: Even more car manuals for everyone

Keyless Ignition Node (Kin)

REMOVAL 

  1. Remove the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL AND INSTALLATION .
    GC0200600Courtesy of CHRYSLER GROUP, LLC
    1 - Locking Tabs
  2. Working from below the dash locate and release the locking tabs securing the Keyless Ignition Node (KIN) from the bezel and remove the KIN from the vehicle.
  3. Disconnect the wire harness connector.

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle.