2.4L Multi Air: Removal
CAUTION:
Do not loosen radiator draincock with system hot and pressurized. Serious burns from coolant can occur.
- Remove the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION COVER, ENGINE, REMOVAL AND INSTALLATION COVER, ENGINE, REMOVAL AND INSTALLATION .
- Remove the belly pan. Refer to BELLY PAN, REMOVAL AND INSTALLATION .
- Remove the battery tray. Refer to TRAY, BATTERY, REMOVAL AND INSTALLATION .
- Drain the cooling system. Refer to STANDARD PROCEDURE .
- Disconnect the engine coolant temperature sensor wire harness connector (1).
- Remove the engine coolant temperature sensor (2).
INSTALLATION
- Install the engine coolant temperature sensor (2) and tighten the sensor to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Connect the engine coolant temperature sensor wire harness connector (1).
- Fill the cooling system. Refer to STANDARD PROCEDURE .
- Install the battery tray. Refer to TRAY, BATTERY, REMOVAL AND INSTALLATION .
- Install the belly pan. Refer to BELLY PAN, REMOVAL AND INSTALLATION .
- Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION COVER, ENGINE, REMOVAL AND INSTALLATION COVER, ENGINE, REMOVAL AND INSTALLATION .