LEMON Manuals
: Even more car manuals for everyone
Home
›
Jeep
›
2011
›
Grand Cherokee 2WD V6-3.6L
›
Repair and Diagnosis
›
Brakes and Traction Control
›
Hydraulic System
›
Brake Fluid Level Sensor/Switch
›
Service and Repair
›
Brake Fluid Level Switch - Installation
Brake Fluid Level Switch - Installation
INSTALLATION
1.
Install the sensor (3) with a new O-ring into the reservoir (1) until the locking tabs are engaged.
2.
Install the wire connector (2) to the fluid level sensor (3).