Power Steering Pump - 3.8L
Courtesy of CHRYSLER LLC
- Install pulley (1) on pump (if removed). See INSTALLATION .
- Install pump on the engine.
- Install 3 pump mounting bolts (2) and tighten to 26 N.m (19 ft. lbs.).
Courtesy of CHRYSLER LLC
- Install the pressure line on the pump and tighten to 31 N.m (23 ft. lbs.).
- Install supply hose on pump.
- Install drive belt. Refer to INSTALLATION
.
- Fill and bleed the power steering system. See STANDARD PROCEDURE .
- Check for leaks.
- Install the air box assembly. Refer to INSTALLATION
.