LEMON Manuals: Even more car manuals for everyone

Drag Link (Knuckle Side)

Fig 1: Drag Link Adjustment
GC0063424Courtesy of CHRYSLER LLC
  1. Thread the drag link socket into the adjuster. Tighten the adjustment sleeve bolt finger tight (1). Do not tighten to specs until after the toe set is complete.
    Fig 2: Retaining Nuts
    GC0063438Courtesy of CHRYSLER LLC
  2. Install the drag link to the knuckle and tighten the nut to 85 N.m (63 ft. lbs.)
  3. Install the tie rod end to the knuckle and tighten to 85 N.m (63 ft. lbs.).
  4. Install the right side tire.
  5. Lower the vehicle.
  6. Set the toe. Refer to STANDARD PROCEDURE .