LEMON Manuals
: Even more car manuals for everyone
Home
›
Jeep
›
2007
›
Commander 2WD V8-4.7L VIN P Flex Fuel
›
Repair and Diagnosis
›
Brakes and Traction Control
›
Hydraulic System
›
Brake Fluid Level Sensor/Switch
›
Service and Repair
›
Installation
Installation
INSTALLATION
1.
Install the sensor (1) with a new o-ring into the reservoir (2) until the locking tabs are engaged.
2.
Install the wire connector to the fluid level sensor (2).