LEMON Manuals: Even more car manuals for everyone

PDC Relay Cassette Removal

  1. Remove the relay wedge from the PDC relay cassette to be removed.
    NOTE: It may be necessary to remove relay cassettes that are not being serviced from the PDC housing in order to obtain sufficient clearance to service the faulty relay cassette. The same service procedure is repeated as necessary to remove each of the interfering relay wedges and relay cassettes from the PDC housing.
  2. From the top of the PDC housing, use a small screwdriver or a terminal pick tool (Special Tool Kit 6680) to release the two latches that secure the relay cassette in the PDC. See Fig 1.
    Fig 1: PDC Relay Cassette Latches - Typical
    GC0026746Courtesy of DAIMLERCHRYSLER CORP.
    1 - LATCHES
    2 - FROM SPECIAL TOOL KIT 6680
    3 - PDC RELAY CASSETTES
  3. Gently and evenly press the relay cassette down through the PDC housing.
  4. From the bottom of the PDC housing, remove the relay cassette from the PDC. See Fig 2.
Fig 2: PDC Relay - Typical
GC0026747Courtesy of DAIMLERCHRYSLER CORP.
1 - PDC HOUSING
2 - PDC RELAY CASSETTE
3 - LATCHES
CAUTION: Do not remove the wiring and terminals from the terminal cavities of the faulty PDC relay cassette at this time. Refer to ASSEMBLY  for the proper procedures for transferring the wiring and terminals to the replacement PDC relay cassette.