LEMON Manuals: Even more car manuals for everyone

Counter Balance Shaft Timing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Counterbalance Shaft Alignment Marks
GC0003883Courtesy of DAIMLERCHRYSLER CORP.
1 - COUNTERBALANCE SHAFT GEAR
2 - TIMING MARK
3 - IDLER SPROCKET GEAR
  1. Ensure that the engine is at TDC with both camshaft sprocket V6 marks in the 12 o'clock position.
  2. Look down the left cylinder head chain cavity. The timing dot (2) on the counter balance shaft drive gear should be in the 6 o'clock position. See Fig 1.