EVAP/Purge Solenoid: Removal
The duty cycle EVAP canister purge solenoid (DCP) is located in the engine compartment. See Fig 1. It is attached to a bracket located between the battery and the Power Distribution Center (PDC). The EVAP system test port is located near the solenoid. See Fig 1.
- Disconnect electrical wiring connector at solenoid.
- Disconnect vacuum harness at solenoid.
- Remove solenoid and its support bracket (pull straight up).
| 1 - BATTERY |
| 2 - EVAP/PURGE SOLENOID LOCATION |
| 3 - MOUNTING BRACKET |
| 4 - POWER DISTRIBUTION CENTER (PDC) |
| 5 - SOLENOID ELECTRICAL CONNECTOR |
| 6 - EVAP SYSTEM TEST PORT |