- Review the High Pressure Fuel System Warning (Refer to WARNING ).
- Disconnect negative battery cable.
- Remove engine cover (Refer to ENGINE - REMOVAL)
, (Refer to ENGINE - REMOVAL)
or (Refer to ENGINE - REMOVAL)
.
- Disconnect injector electrical connector.
CAUTION:
Repeated mounting of the retaining ring is not permitted.
- Remove fuel return line from injector. See Fig 1.
- Remove fuel injector high pressure line (Refer to WARNING ). See Fig 1.
- Remove fuel injector retainer and retaining bolt. See Fig 1.
NOTE:
DO NOT use a wire brush to clean the fuel injector or nozzle. Possible restriction of the injector needle may result.
- Remove fuel injector from cylinder head. See Fig 1.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - VM9075 |
| 2 - FUEL INJECTOR |
CAUTION:
If the fuel injectors will not come out of the cylinder head, perform the following steps to prevent damaging other components.
- Assemble and install Injector extractor special tool VM 9075A on to injector and cylinder head. See Fig 2.