LEMON Manuals: Even more car manuals for everyone

Intake Air Temperature Sensor: Removal: 3.7L

The intake manifold air temperature (IAT) sensor is installed into the left side of intake manifold plenum. See Fig 1.

  1. Disconnect electrical connector from IAT sensor.
  2. Clean dirt from intake manifold at sensor base.
  3. Gently lift on small plastic release tab (See Fig 1 or Figure) and rotate sensor about 1/4 turn counter-clockwise for removal.
  4. Check condition of sensor o-ring.
Fig 1: IAT Sensor Location - 3.7L V-6
GC0006582Courtesy of DAIMLERCHRYSLER CORP.
1 - IAT SENSOR
2 - RELEASE TAB
3 - ELECTRICAL CONNECTOR