Power Seats: Description
| 1 - HEATED SEAT SWITCH |
| 2 - POWER SEAT SWITCH |
Individually controlled, electrically powered front seats are available as factory-installed equipment on this model. Vehicles with this option can be visually identified by the two separate power seat switches, mounted on each of the front seat cushion side shields. See Fig 1. The power seat system option allows the front seating positions to be electrically adjusted for optimum vehicle control and comfort. The power seat cushion can be adjusted forward, rearward, front up, front down, rear up, or rear down. The power seat system for this vehicle includes the following major components, which are described in further detail later in this article:
- Power Seat Switches - Two power seat switches are used per vehicle, one for the driver and one for the front seat passenger. Refer to LEFT POWER SEAT SWITCH and RIGHT POWER SEAT SWITCH .
- Power Seat Tracks - Two power seat tracks are used per vehicle, one for the driver and one for the front seat passenger seats. Refer to POWER SEAT TRACK .
- Circuit Breaker - An automatic resetting circuit breaker (# 1) is located in the Junction Block and is used to protect the power seat system from current overload.
Hard wired circuitry connects the power seat system components to each other through the electrical system of the vehicle. These hard wired circuits are integral to several wire harnesses, which are routed throughout the vehicle and retained by many different methods. These circuits may be connected to each other, to the vehicle electrical system and to the power seat system components through the use of a combination of soldered splices, splice block connectors and many different types of wire harness terminal connectors and insulators. Refer to SYSTEM WIRING DIAGRAMS for more information. The wiring information includes wiring diagrams, proper wire and connector repair procedures, further details on wire harness routing and retention, as well as pin-out and location views for the various wire harness connectors, splices and grounds.