Removal & Installation
WARNING: This page is about a different car, the 2004 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Position appropriate front seat in most rearward position. Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
- Remove cover over Powertrain Control Module (PCM) 32-pin harness connectors, then disconnect connectors. See Fig 1 . Cover snaps onto PCM. Remove 3 PCM mounting bolts and PCM.
- To install, reverse removal procedure. Using DRBIII, reprogram NEW PCM with vehicles original Identification Number (VIN) and mileage.