LEMON Manuals: Even more car manuals for everyone

Fuel Injector: Installation

WARNING: This page is about a different car, the 2004 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install fuel injector(s) into fuel rail assembly and install retaining clip(s).
  2. If same injector(s) is being reinstalled, install new o-ring(s).
  3. Apply a small amount of clean engine oil to each injector o-ring. This will aid in installation.
  4. Install fuel rail. Refer to FUEL RAIL .
  5. Start engine and check for fuel leaks.