LEMON Manuals: Even more car manuals for everyone

Accelerator Pedal: Installation

WARNING: This page is about a different car, the 2004 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place accelerator pedal assembly over 2 studs protruding from floor pan.
  2. Install 2 mounting nuts. Refer to TORQUE .
  3. Slide throttle cable into opening slot in top of pedal arm.
  4. Push plastic cable retainer (clip) into accelerator pedal arm opening until it snaps into place.
  5. Before starting engine, operate accelerator pedal to check for any binding.