Test VER-3: Occupant Classification System Test
WARNING: This page is about a different car, the 2004 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Remove all test equipment and jumpers. Reconnect all previously disconnected components and connectors. Using DRBIII and most current software, clear all DTCs in all air bag system modules. Turn ignition off, wait 15 seconds, then turn ignition on.
- Wait one minute, and read active DTCs in ACM and OCM and if none are present, read stored DTCs. If no DTCs are displayed, repair is complete. If DTCs are displayed, go to DIAGNOSTIC TROUBLE CODES (DTCS) .