LEMON Manuals: Even more car manuals for everyone

Heated Seat Sensor

  1. Disconnect and isolate the negative battery cable. Unplug the 4-way heated seat cushion wire harness connector.
  2. Using an ohmmeter, check the resistance between the heated seat switch output circuit cavity and the ground circuit cavity of the seat cushion cover half of the heated seat cushion wire harness connector. The sensor resistance should be between 2 k/ohms and 200 k/ohms, If okay, test the heated seat control module. See HEATED SEAT CONTROL MODULE  . If not okay, replace the faulty seat cushion cover.