LEMON Manuals: Even more car manuals for everyone

Installation Procedure

    Fig 1: View Of Seat Belt Buckle Assembly
    GM1333095Courtesy of GENERAL MOTORS CORP.
  1. Install the seat belt buckle assembly (1) through the seat cushion pad.
  2. NOTE: Refer to Fastener Notice.
  3. Install the seat belt buckle assembly (1) to the seat adjuster with the bolt (2).

    Tighten:  Tighten the front seat belt buckle bolt to 55 N.m (41 lb ft).

  4. Fig 2: View Of Seat Buckle Electrical Connector & Wiring Harness
    GM1333091Courtesy of GENERAL MOTORS CORP.
  5. Connect the seat belt buckle electrical connector (1).
  6. Install the seat from the vehicle. Refer to Front Seat Replacement - Bucket or Split Bench Seat Replacement .