LEMON Manuals: Even more car manuals for everyone

Circuit Description

Quad Driver Modules (QDM) are used by ECM to turn ON current-driven devices that are needed to control 2 engine functions. ECM monitors open or short circuits of either Canister Control Purge (CCP) vent solenoid or Variable Intake Manifold (VIM).

When DTC sets, ECM will not illuminate MIL. ECM will store conditions present when DTC was set as FAILURE RECORDS data only.

ECM will turn MIL off on third consecutive trip cycle during which diagnostic runs and fault is no longer recognized. A history DTC will clear after 40 consecutive trip cycles during which diagnostic runs and fault is no longer recognized. DTC can be cleared with scan tool, or by disconnecting battery voltage feed to ECM.