LEMON Manuals: Even more car manuals for everyone

Circuit Description

ECM checks validity of signals used in ION Sensing Module under following conditions:

When DTC sets, ECM illuminates MIL as soon as fault was detected. ECM calculates an air flow value based on idle air control valve position, throttle position, RPM and barometric pressure. ECM will store conditions present when DTC was set as freeze frame data in the FAILURE RECORDS data.

ECM will turn MIL off on third consecutive trip cycle during which diagnostic runs and fault is no longer recognized. A history DTC will clear after 40 consecutive trip cycles during which diagnostic runs and fault is no longer recognized. DTC can be cleared with scan tool, or by disconnecting battery voltage feed to ECM.