Code Enable Criteria
Following conditions must be met for DTC diagnostic test to run:
- Sensor output is changing 2 percent or more within 124 miles, or fuel level sensor position change is less than 15 percent within 124 miles.
- Throttle position is less than 2 percent.
- Vehicle speed is more than 0.6 mph.
- No fuel level sensor or VSS DTC set.
- Intake air temperature is 32°F (0°C) or more.
- Manifold absolute pressure value changes less than 10 kPa in 3 seconds.
- Engine speed changes less than 50 RPM in 3 seconds.