Circuit Description
Manifold Absolute Pressure (MAP) sensor responds to changes in intake manifold pressure (vacuum). MAP sensor signal voltage to Engine Control Module (ECM) varies from below 2 volts at idle (high vacuum) to above 4 volts at wide-open throttle (low vacuum) at sea level.
MAP sensor is used to determine manifold pressure changes while linear Exhaust Gas Recirculation (EGR) flow test diagnostic is being run (refer to DTC P0401, see DTC P0401: EXHAUST GAS RECIRCULATION FLOW INSUFFICIENT ) to determine engine vacuum level for some other diagnostics, and barometric pressure (BARO). ECM compares MAP sensor signal to a calculated MAP based on throttle position and various engine load factor. If ECM detects a MAP signal that varies excessively above or below the calculated value, DTC P0106 will set.