Surges Or CHUGGLES: Ascender
- See SYMPTOMS .
- Perform On-Board Diagnostic II System Check.
- Be sure the driver understands the torque converter clutch operation.
- Ensure that the transmission fluid is at the proper level.
- Display the scan tool parameters for the various engine controls sensors. Inspect for any abnormal readings.
- Inspect for a rich or lean symptom that causes the condition. Drive the vehicle at the speed of the complaint. Monitoring the fuel trim will help identify the condition.
- If the system is running lean the long term fuel trim will be more than 150.
- If the system is running rich the long term fuel trim will be less than 115.
- Test the fuel pressure while the condition exists. See FUEL SYSTEM DIAGNOSIS in BASIC DIAGNOSTIC PROCEDURES article.
- Inspect the in-line fuel filter for a restriction.
- Inspect the spark plugs. Remove the plugs and inspect for wetness, cracks, wear, improper gap, burned electrodes, or heavy deposits.
- Inspect the control module grounds for being clean, tight, and in their proper locations. See ENGINE PERFORMANCE in appropriate SYSTEM WIRING DIAGRAMS article.
- Test the generator output voltage.
- Inspect the vacuum hoses for kinks or leaks.
- Inspect the Torque Converter Clutch (TCC) operation. See DIAGNOSIS in appropriate AUTOMATIC TRANSMISSION article.
- Inspect the exhaust system for a possible restriction.