LEMON Manuals: Even more car manuals for everyone

Camber Adjustment

The camber angle can be adjusted by means of the camber shims (2) installed in position between the chassis frame (1) and fulcrum pins

CAUTION: Left and right side must be equal within 30'.
Fig 1: Adjusting Camber Angle (1 Of 2)
G02800039Courtesy of ISUZU MOTOR CO.
Fig 2: Adjusting Camber Angle (2 Of 2)
G02800040Courtesy of ISUZU MOTOR CO.
NOTE: Overall thickness of caster shim and camber shim should be 10.8 mm (0.425 in) or less.

Tighten the fulcrum pin bolt to the specified torque.

Torque:  152 N.m (112 lb ft)

Fig 3: Angle Change Chart
G02800041Courtesy of ISUZU MOTOR CO.