Circuit Description
A linear Exhaust Gas Recirculation (EGR) valve is used on this system. Powertrain Control Module (PCM) commands EGR valve to operate when necessary by controlling a ground signal through PCM. This can be monitored on a scan tool by selecting DESIRED EGR POSITION function. Ignition voltage is supplied to EGR valve thorough a fuse. PCM monitors results of its command through a feedback signal. Feedback signal is the actual position of the EGR pintle. This feedback signal can also be monitored on a scan tool by selecting ACTUAL EGR POSITION function. The ACTUAL EGR POSITION should always be near the commanded or DESIRED EGR POSITION.
Conditions for setting this DTC are as follows:
- No presence of Codes: P0106-P0108, P0112, P0113, P0117, P0118, P0121-P0123, P0125, P0200, P0300-P0304, P0335, P0440, P0442, P0446, P0502, P0503, P0506, P0507, P1441.
With EGR commanded off.
- Actual EGR position is greater than 3 percent for 25 seconds.
- ACTUAL EGR POSITION differs from DESIRED EGR POSITION by greater than 6 percent for 20 seconds.
With EGR commanded on.
- ACTUAL EGR POSITION differs from DESIRED EGR POSITION by greater than 9 percent for 18 seconds when DESIRED EGR POSITION is less than 99 percent.
- ACTUAL EGR POSITION differs from DESIRED EGR POSITION by greater than 20 percent for 18 seconds when DESIRED EGR POSITION is greater than 99 percent.