Circuit Description
With EVAP vent solenoid open, vacuum in system should decrease quickly unless vent path is blocked.
Conditions required to test for DTC are:
- Engine coolant temperature and intake air temperature is 39-86°F(4-30°C) at engine start-up.
- Engine Coolant Temperature (ECT) sensor and Intake Air Temperature (IAT) sensor are within 39°F (4°C) at engine start-up.
- Barometric Pressure (BARO) is more than 70 kPa.
- TP angle is 9-35 percent.
- No presence of Codes: P0106, P0107, P0108, P0112, P0113, P0117, P0118, P0121-P0123, P0125, P0131-P0134, P1133.
- Engine run time is more than 2 minutes.
- Fuel tank level is 15-85 percent.