LEMON Manuals: Even more car manuals for everyone

Engine Mechanical: Starter: Overhaul

NOTE: When reassembling motor, ensure armature bearings and bushings are not excessively worn and are lubricated.

To install pinion stop collar. Place stop collar with flat side toward drive pinion. Slide NEW retaining ring onto armature shaft and into groove. Install thrust collar with small flange toward retaining ring. Use 2 sets of pliers. Snap stop collar onto retaining ring. See Fig 1 . Use exploded view of starter assembly for disassembly and reassembly reference. See Fig 2 .

Fig 1: Removing Thrust Collar
G96G06665Courtesy of ISUZU MOTOR CO.
Fig 2: Exploded View Of Starter
G92I00080Courtesy of ISUZU MOTOR CO.