LEMON Manuals: Even more car manuals for everyone

Diagnostic Aids

After engine is started, temperature should rise steadily to approximately 194°F (90°C), then stabilize when thermostat opens. If Code 21 is also set, check circuit No. D2 for faulty wiring or connections. Check terminals at sensor for good contact. For intermittent inspection, see INTERMITTENTS under TESTS W/O CODES article in the ENGINE PERFORMANCE Section.

Fig 1: Code 15 Schematic - CTS Circuit (Low Temperature Indicated)
G92I25112Courtesy of ISUZU MOTOR CO.
Fig 2: Code 15 Flow Chart - CTS Circuit (Low Temperature Indicated)
G92A25114Courtesy of ISUZU MOTOR CO.