LEMON Manuals: Even more car manuals for everyone

Blower Switch Testing

  1. Disconnect blower switch connectors from blower switches "A" and "B". With blower switch in OFF position, continuity should not be present between any terminals. With switch "B" in position No. 1, continuity should be present between terminals No. 1 and 2 of switch "B".
  2. With blower switches "A" and "B" in No. 2 position, continuity should be present between terminal No. 3 of switch "A" and terminal No. 2 of switch "B". See Fig 1 . With switches "A" and "B" in No. 3 position, continuity should be present between terminal No. 2 of switch "A" and terminal No. 2 of switch "B". With switches "A" and "B" in No. 4 position, continuity should present between terminals No. 1 of switch "A" and terminal No. 2 of switch "B".
Fig 1: Testing Blower Switch
G91C04551Courtesy of ISUZU MOTOR CO.