Injector Nozzles: Cleaning
- Having drawn out the needle valve from the nozzle body , remove carbon from the nozzle body outside with a brush. Clean all but the lapped surface, especially around the injection hole.
- Clean the interior cavity of the nozzle body with Brass Bar (J-28826-2). Clean the nozzle seat portion of the nozzle body with a Cleaning Nozzle (J-28826-3).
- To clean injection hole of nozzle body, couple a Brass Bar (J-28826-4) with another Brass Bar (J-28826-5) together. Use this for cleaning the needle sliding portion. Use a Cleaning Bar (J-28826-6) made of beech wood to remove carbon from the end of the needle.